Graft Board  |   ACL Screw Driver  |   Trocar Tip Passing Pin - Stainless Steel  |   Cruciate Guide Wire  |   Flower Tip Reamer  |   Endoscopic Drill  |   Tendon Striper  |   Suture Retriever   |   Sizing Tube   |   Femoral Offset  |   Bone Tunnel Plug Polyacetal

Graft Board

Profile:

  • Ideal board for graft preparation
  • It has the facility for cutting the graft to the desired length.
  • Tensioning post is ideal for pre-tensioning grafts when using the ACL button.
  • Fully autoclavable.
  • Scale marking is provided.
  • Proper Holding of ACL Button.
Code No. Size mm
650.191 Graft Board

ACL Screw Driver
Code No. 650.490

Screw Driver Standard (without sutures) for 3mm Anchor Screw
Code No. 650.491

Screw Driver Standard (without sutures) for 5mm Anchor Screw
Code No. 650.492

Trocar Tip Passing Pin - Stainless Steel

Profile: With eyelet for suture passage.

Code No. Size mm
650.230 2.4mm x 28cm
650.232 2.4mm x 43cm

Cruciate Guide Wire - Stainless Steel

Profile: To be used with cruciate guides and cannulated drill bits Sizes: 2.4mm (dia) x 25 cm (l)

Code No. 650.205

Flower Tip Reamer - Stainless Steel

Profile:

  • Made from virgin material.
  • Two cutting edge.
  • Flower tip shapedLong lasting edge for easy drilling of tibial and femoral tunnel.
  • Cannulated and marked at regular intervals for easy reference.
Code No. Size mm
650.400 6
650.402 7
650.404 8
650.406 9
650.408 10
650.410 11
650.412 12

Endoscopic Drill - Stainless Steel

Profile:

  • Made from virgin material.
  • Cannulated and marked at regular intervals for easy reference.
Code No. Size mm
650.450 6
650.452 7
650.454 8
650.456 9
650.458 10
650.460 11
650.462 12

Tendon Striper - Stainless Steel

Profile:

  • Open & close with Sharp edge.
  • Used for semitendinosus and gracilis graft harvesting.

Size Closed End Open End
5 mm x 12 inch 5 mm x 12 inch 650.250
6 mm x 12 inch 650.153 650.253
7 mm x 12 inch 650.157 650.257

Suture Retriever - Stainless Steel

Profile:

  • Used for passing or retrieving sutures through instrumentation with cannulations of 1.5mm or longer.
  • Used in conjunction with isometric positioning, isotac drivers, buttons and passing pins.
  • Autoclavable.

Code No. Description
650.200 Suture Retriever - Stainless Steel

Sizing Tube - Stainless Steel

Profile: sed with ACL & PCL Drill Guide Systems to size the Graft for Precise Tunnel interface.

Code No. Size
650.106 6 mm
650.107 7 mm
650.108 8 mm
650.109 9 mm
650.110 10 mm
650.111 11 mm
650.112 12 mm

Femoral Offset
Code No. Size
650.206 5 mm
650.207 6 mm
650.208 7 mm

Bone Tunnel Plug Polyacetal

Profile:

  • Non-sterile.
  • Fits (7-8mm, 9-10mm, 10-11mm, 11-12mm, 13-14mm) tunnels.

Code No. Size
650.190 Cannulated

Bone Tunnel Plug Polyacetal

Profile:

  • Non-sterile.
  • Fits (7-8mm, 9-10mm, 10-11mm, 11-12mm, 13-14mm) tunnels.

Code No. Size
650.192 Non - Cannulated