| Set Consisting of: |
Units |
| Q.077.01 - Protection Sleeve |
1 |
| Q.077.02 - Guide Pin Sleeve Ø17.5 / Ø3.2
| 1 |
| Q.077.03 - Proximal Cannulated Drill Bit Ø17.5 / Ø3.2 |
1 |
| Q.077.04 - Quick Coupling Handle Ø8.0 |
1 |
| Q.077.05 - Adapter |
1 |
| Q.077.06 - Soft Tissue Protective Plate |
1 |
| Q.077.07 - Awl |
1 |
| Q.077.08 - Fracture Allignment Device (T-Type) |
1 |
| Q.077.09 - Ball Head Guide Pin Ø2.5/Ø4.0, Length 680mm |
2 |
| Q.077.10 - Guide Pin Handle |
1 |
| Q.077-9.0 - Flexible Reamer shaft with fixed Reamer Ø9.0mm |
1 |
| Q.077-10.0 - Flexible Reamer shaft with fixed Reamer Ø10.0mm |
1 |
| Q.077-11.0 - Flexible Reamer shaft with fixed Reamer Ø11.0mm |
1 |
| Q.077-12.0 - Flexible Reamer shaft with fixed Reamer Ø12.0mm |
1 |
| Q.077-13.0 - Flexible Reamer shaft with fixed Reamer Ø13.0mm |
1 |
| Q.077.16 - Handle |
1 |
| Q.077.17 - Connect Screw Nut 7/16" -20 SWS |
2 |
| Q.077.18 - Connect Screw Wrench SWS-0 |
1 |
| Q.077.19 - Impactor connector with Rod 7/16" -20 |
1 |
| Q.077.21 - Open Wrench SW11 |
1 |
| Q.077.22 - Nail Removal Rod 7/16" -20 |
1 |
| Q.077.23 - Hammer |
1 |
| Q.077.24 - Proximal Guide Rod |
1 |
| Q.077.25 - Lock Wheel for Guide Rod m8x1 |
1 |
| Q.077.26 - Proximal Drill Sleeve Ø18/Ø11.2/Ø8.2 x 190 |
1 |
| Q.077.27 - Guide Pin Sleeve Ø11.2/Ø3.2 |
1 |
| Q.077.28 - Threaded Guide Pin Ø3.2 x 343 |
5 |
| Q.077.29 - Depth Gauge Ø3.2 (343-190) |
1 |
| Q.077.30 - Proximal Cortical Drill Bit Ø7.0/Ø8.2mm |
1 |
| Q.077.31 - Proximal Drill Bit Ø7.0 /Ø8.2mm |
1 |
| Q.077.32 - Proximal Position Rod Ø8.2/ Ø7.0mm |
1 |
| Q.077.33 - Proximal Cortical Cannulated Drill Bit Ø3.2/ Ø11.0/ Ø11.2mm |
1 |
| Q.077.34 - Proximal Cortical Cannulated Drill Bit Ø3.2/ Ø11.0/ Ø11.2mm with Limitation |
1 |
| Q.077.35 - Limitation |
1 |
| Q.077.36 - Proximal Locking Screw Cannulated Tap Ø3.2/ Ø11.0mm |
1 |
| Q.077.37 - Proximal Screw Wrench (2.55/3.05) |
1 |
| Q.077.38 - Proximal Screw Holder (M4.5/SW3.0) |
1 |
| Q.077.39 - Limitation Wrench SW3.0 |
1 |
| Q.077.40 - Proximal Screw Compression Nut |
1 |
| Q.077.41 - Anti-Rotation Screw Wrench SW4.5 |
1 |
| Q.077.42 - Screw Driver for Locked Nut SW4.5 |
1 |
| Q.077.43 - Distal Guide Rod 180mm/ 240mm |
1 |
| Q.077.44 - Distal Guide Rod 200mm |
1 |
| Q.077.45 - Distal Guide Rod State 90° 180/200/240 |
1 |
| Q.077.46 - Guide Lock Wheel M8x1 |
3 |
| Q.077.47 - Distal Lock Screw Sleeve Ø11/ Ø8.2mm |
1 |
| Q.077.48 - Distal Lock Screw Drill Sleeve Ø8.2/ Ø4.3mm |
1 |
| Q.077.49 - Sleeve Pin Ø4.3mm |
1 |
| Q.077.50 - Drill Bit Ø4.3mm |
3 |
| Q.077.51 - Limitation Ø4.3/ SW3.0 |
1 |
| Q.077.52 - Depth Gauge Ø3.2 (343-190) |
1 |
| Q.077.53 - Screw Driver SW4.0 for Distal Locking Screw |
1 |
| Q.077.54 - Screw Driver SW8.0 for connect screw |
1 |
| Q.077.55 - Screw Driver SW4.5 for End Cap |
1 |
| Q.077.56 - Guide Pin with Hook Ø2.8mm |
1 |
| Q.077.57 - Clean Guide Pin Ø3.0mm |
1 |
| Q.077.000 - Empty Container |
1 |
