| Q.076.01 - Cannulated Hexagonal Screw Driver Ø 4.0mm, Length 300mm, for PFNA-II End Cap |
1 |
| Q.076.02 - Hexagonal Screw Driver Ø3.5mm, Length 300mm |
1 |
| Q.076.03 - Pin Wrench Ø4.5mm, Length 120mm
| 1 |
| Q.076.04 - Cannulated Hexagonal Socket Ø11.0/11.0mm |
1 |
| Q.076.05 - Compression Nut, for PFNA-II Blade |
1 |
| Q.076.06 - Protection Sleeve Ø16.0/11.0mm, for PFNA-II Blade |
1 |
| Q.076.07 - Drill Sleeve Ø11.0/3.2mm, for PFNA-II Blade |
1 |
| Q.076.08 - Trocar Ø3.2mm, for PFNA-II Blade |
1 |
| Q.076.09 - Reamer Ø11mm, for PFNA-II Blade |
1 |
| Q.076.10 - Drill Bit Ø11mm, for PFNA-II Blade |
1 |
| Q.076.11 - Drill Sleeve Ø8.0/4.0mm |
1 |
| Q.076.12 - Direct Measuring Device for Guide Wire Ø3.2mm |
1 |
| Q.076.13 - Guide Wire Ø3.0mm, for PFNA-II Blade |
1 |
| Q.076.14 - Protection Sleeve Ø11.0/8.0mm |
1 |
| Q.076.15 - Key for PFNA-II Blade |
1 |
| Q.076.16 - Trocar Ø4.0mm, for PFNA-II Blade |
1 |
| Q.076.17 - Drill Bit Ø4.0mm, for PFNA-II |
1 |
| Q.076.18 - Measuring Device for Locking Bolt |
1 |
| Q.076.19 - Fixation Sleeve / Stopper for Reamer Ø11mm |
1 |
| Q.076.20 - Hammer Guide for Slotted Hammer |
1 |
| Q.076.21 - Universal Chuck with T-Handle |
1 |
| Q.076.22 - Aiming Arm 130°, for PFNA-II Blade |
1 |
| Q.076.23 - Impactor for PFNA-II Blade |
1 |
| Q.076.24 - Excertion Screw for PFNA-II Blade |
1 |
| Q.076.25 - Compression Instrument for PFNA-II Blade |
1 |
| Q.076.26 - Protection Sleeve Ø21.0/17.0mm, for PFNA-II |
1 |
| Q.076.27 - Drill Sleeve Ø18.0/3.5mm, for PFNA-II |
1 |
| Q.076.28 - Hexagonal Screw Driver Ø10.0mm, Solid |
1 |
| Q.076.29 - CannulCannulated Drill Bit Ø17.0mm with Flexible Shaft, for PFNA-II |
1 |
| Q.076.31 - Tissue Protector |
1 |
| Q.076.32 - Cleaning Stylet Ø2.8mm, Length 450mm, for Cannulated Instruments |
1 |
| Q.076.33 - Cleaning Stylet Ø2.8mm, Length 170mm |
1 |
| Q.076.34 - Aiming Arm for Dynamic Locking + Static Locking, for PFNA-II Short Nail Length 240mm |
1 |
| Q.076.35 - Bone Awl for PFNA-II |
1 |
| Q.076.36 - Small Aiming Arm for Dynamic Locking + Static Locking, for PFNA-II Short Nail Length 170mm & 200mm |
1 |
| Q.076.37 - Hexagonal Ratchet Wrench for Nut ÿ 11.0mm |
1 |
| Q.076.38 - Insertion Handle for PFNA-II |
1 |
| Q.076.39 - Connecting Screw for Insertion Handle |
1 |
| Q.076.40 - Hexagonal Wrench with T-Handle for Connection Screw |
1 |
| Q.076.41 - Slotted Hammer 400g, Can be mounted |
1 |
| Q.076.42 - Connector for Insertion Handle |
1 |
| Q.076.43 - Hammer 500g for PFNA-II Instruments |
1 |
| Q.076.44 - Stylet Ø2.4mm with Loop |
1 |
| Q.076.45 - T-Handle with Quick Copling |
1 |
| Q.076.46 - Pin Holder, for PFNA-II Nail Set |
1 |
| Q.076.47 - Distal Guide Bar Connector, for PFNA-II |
1 |
| Q.076.48 - Distal Guide Bar, for PFNA-II |
1 |
| Q.076.49 - Fracture Allignment Device (T-Type), for PFNA-II Instrument Set |
1 |
| Q.076.50 - Drill Bit Ø6.0mm with Quick Coupling |
1 |
| Q.076.51 - T-Type Drill Bit Ø6.0mm |
1 |
| Q.076.52 - Distal Targeting Device for Long Nails |
1 |
| Q.076.53 - Fixture Block |
1 |
| Q.076.54 - Soft Tissue Seperator - Short |
1 |
| Q.076.55 - Locking Nut Wrench |
1 |
| Q.076.56 - Allignment Rod |
1 |
| Q.076.57 - Drill Sleeve Ø9.5mm x 8.3mm |
1 |
| Q.076.58 - Drill Sleeve Fixture Rod |
1 |
| Q.076-9.0 - Flexible Reamer Shaft with Fixed Reamer Ø9mm |
1 |
| Q.076-10.0 - Flexible Reamer Shaft with Fixed Reamer Ø10mm |
1 |
| Q.076-11.0 - Flexible Reamer Shaft with Fixed Reamer Ø11mm |
1 |
| Q.076-12.0 - Flexible Reamer Shaft with Fixed Reamer Ø12mm |
1 |
| Q.076.000 - Empty Container |
|
