Dia in mm | STAINLESS STEEL (ELASTIC NAIL) | ||
---|---|---|---|
Lenght 30cm | Lenght 40cm | Lenght 44cm | |
1.5 | TEN1.5-30 | TEN1.5-40 | - |
2.0 | TEN2-30 | TEN2-40 | TEN2-44 |
2.5 | TEN2.5-30 | TEN2.5-40 | TEN2.5-44 |
3.0 | TEN3-30 | TEN3-40 | TEN3-44 |
3.5 | TEN3.5-30 | TEN3.5-40 | TEN3.5-44 |
4.0 | TEN4-30 | TEN4-40 | TEN4-44 |
4.5 | TEN4.5-30 | TEN4.5-40 | TEN4.5-44 |
Dia in mm | (ELASTIC NAIL) | ||
---|---|---|---|
Lenght 30cm | Lenght 40cm | Lenght 44cm | |
1.5 | Ti-TEN1.5-30 | Ti-TEN1.5-40 | - |
2.0 | Ti-TEN2-30 | Ti-TEN2-40 | Ti-TEN2-44 |
2.5 | Ti-TEN2.5-30 | Ti-TEN2.5-40 | Ti-TEN2.5-44 |
3.0 | Ti-TEN3-30 | Ti-TEN3-40 | Ti-TEN3-44 |
3.5 | Ti-TEN3.5-30 | Ti-TEN3.5-40 | Ti-TEN3.5-44 |
4.0 | Ti-TEN4-30 | Ti-TEN4-40 | Ti-TEN4-44 |
4.5 | Ti-TEN4.5-30 | Ti-TEN4.5-40 | Ti-TEN4.5-44 |
Code No. | For Nails Diameter |
---|---|
056.01-SS | Ø 1.5 - 2.5 |
056.03-SS | Ø 3.0 - 4.0 |
Code No. | For Nails Diameter |
---|---|
056.01-Ti | Ø 1.5 - 2.5 |
056.03-Ti | Ø 3.0 - 4.0 |
AS149 Instruments Set for TENS Nails | |
Set Consisting of : | Units |
AS149.001 - Impactor for TENS Nail, Straight | 1 |
AS149.003 - Impactor for TENS Nail, bevelled | 1 |
AS149.005 - Inserter for TENS Nail | 1 |
AS149.007 - Extraction Plier for TENS Nail | 1 |
AS149.009 - Awl for TENS Nail | 1 |
AS149.011 -Hammer Guide for TENS Nail | 1 |
AS149.013 -Pin Wrench dia 4.5mm, L 120mm | 1 |
AS149.015 -F Tool for Reduction Small | 1 |
261.627 -Drill Bits 2.7mm Dia, Total Length 130mm | 1 |
261.633 -Drill Bits 3.2mm Dia, Total Length 200mm | 1 |
261.646 -Drill Bits 4.5mm Dia, Total Length 200mm | 1 |
AS149.023 -Double Drill Guide 4.5/3.2mm | 1 |
AS149.025 -Hammer 500g | 1 |
AS149.027 -Slide Hammer 400g | 1 |
AS149.029 - Awl for Curved L 180mm for Clavicular Fractures | 1 |
AS149.031 -Rod Cutter (upto 6mm) | 1 |
AS149.033 -Pliers Flat Nosed | 1 |
AS149.035 -Empty Container |
Q.149 Instruments Set For Tens Nails - Q-SERIES | |
Set Consisting of : | Units |
Q.149.01 - Hammer | 1 |
Q.149.02 - Awl | 1 |
Q.149.03 - Locking Pliers | 1 |
Q.149.04 - Cutter | 1 |
Q.149.05 - Hammer Guide | 1 |
Q.149.06 - Cutter | 1 |
Q.149.07 -Double Drill Sleeve 3.2/4.5mm | 1 |
Q.149.08 -End Cap for inserter Small | 1 |
Q.149.09 -End cap for inserter Large | 1 |
Q.149.10 -Drill Bit Ø2.7 x 115mm | 1 |
Q.149.11 -Drill Bit Ø3.2 x 150mm | 1 |
Q.149.12 -Drill Bit Ø4.5 x 150mm | 1 |
Q.149.13 -Elastic Nail Inserter | 1 |
Q.149.14 -Standard Temp | 1 |
Q.149.15 - Beveled Temp | 1 |
Q.149.16 - Bender | 1 Pair |
Q.149.000 - Empty Container with Tray for TENS Nail |
Q.150 INSTRUMENT SET FOR TENS NAILS TYPE II | |
Set Consisting of : | Units |
Q.150.001 - Hammer | 1 |
Q.150.007 - Sliding Hammer | 1 |
Q.150.013 - Impactor for Elastic Nail, Straight | 1 |
Q.150.019 - Pin Wrench, Ø4.5 | 1 |
Q.150.025 - Awl | 1 |
Q.150.031 -Plier For Elastic Nail | 1 |
Q.150.037 -Insertor for Elastic Nail | 1 |
Q.150.043 -Triangle Wrench For End Cap | 1 |
Q.150.049 -Driver For End Cap | 1 |
Q.150.055 -Cutter for Elastic Nail | 1 |
Q.150.061 -Impactor For Elastic Nail, Bevelled | 1 |
Q.150.067 -Drill Bit Plain Shank/Jacob Chunk End, Ø2l.7mm x Lenght 125mm | 2 |
Q.150.073 -Drill Bit Quick Coupling End,Ø3.2mm x Length 145mm | 2 |
Q.150.079 -Drill Bit Quick Coupling End,Ø4.5mm x Length 145mm | 2 |
Q.150.085 - Double Drill Guide 4.5/3.2mm | 1 |
Q.150.091 - F-Tool For Reduction - Small | 1 |
Q.150.097 - Awl, Curved Length 180mm,for Clavicular Fractures | 1 |
Q.150.103 - Adjustable Reductor | 3 |
Q.150.109 - Rotatable Wrench (for Cutter) | 1 |
Q.150.115 - Key for Insertor | 1 |
Q.150.121 - Hammer Guide | 1 |
Q.150.000 -Container for Elastic Nail Instrument Set | 1 |