The 3.5 mm LCP Anterolateral Distal Tibia Plate is indicated for fractures, osteotomies, and nonunions of the distal tibia, particularly in osteopenic bone.

• Four distal head holes angle 7° inferiorly to capture the posterior malleolus.
• Elongated hole aids in plate positioning
• Distal locking screws provide support for the articular surface.
• Targeted locking for Volkman's triangle and the Chaput fragment.
• The head of the plate is designed to provide a low profile construct when using locking screws or cortex screws Ø 2.7 mm, resulting in less soft tissue irritation.
• 60°twist in the shaft is contoured for the distal tibia anatomy: less plate contouring is required.
• Anatomic reduction: Anatomic plate profile and four parallel screws near the joint assist reduction of metaphysis to diaphysis to restore alignment and functional anatomy. Anatomic reduction is mandatory for intra-articular fractures to restore joint congruency.
• Stable fixation: The combination of conventional and locking screws offers optimum fixation regardless of bone density.
• Preservation of blood supply: Limited-contact plate design reduces plate-to-bone contact and helps to preserve the periosteal blood supply.

• Extra-articular and simple intra-articular distal tibial fractures.
• Distal tibial fractures, percutaneous or reducible by limited arthrotomy.
• Distal tibial fracture extending into the diaphyseal area.

• These Plates can be anatomically contoured to match with the Distal Medial Tibia.
• These plates are designed for both right and left tibia and are available in a variety of lengths.
• The head hole allows only 3.5 mm Safty Lock screws, the rest of the holes allow both 3.5 mm Safety Lock and Cortical screws.
• Screws :
  • For Combi holes - 3.5 Locking, 3.5 Cortical, 4.0 Cancellous.
  • For Round Locking Holes - 3.5 Locking, 2.7 or 3.5 Cortical, 4.0 Cancellous.

The LCP Medial Distal Tibia Plates without Tab are intended for:

• Fixation of complex intra- and extra-articular fractures of the distal tibia.
• Osteotomies of the distal tibia.

• These plates can be anatomically contoured to match with the Distal Medial Tibia.
• The plates are designed for both right and left Tibia and are available in a variety of lengths.
• The holes in the plate allow a 3.5 mm Safety Lock and 3.5 mm Cortical screws.
• The Head of the plate is low profile for minimal prominence on the medial malleolus.
• Two different plate designs to fit right and left distal tibia (indicated with R or L on the plate.)
• Rounded edges to minimize soft tissue irritation.

• For medial buttressing of comminuted distal tibial fractures.
• For comminuted humeral head fractures.
• The Safety locking feature provides angular stability.
• The holes on the head allow only 3.5 mm Safety Lock screws and the shaft allows both 3.5 mm Safety Lock and Cortical screws.

• Safety Lock Screw Ø 3.5mm- Self Tapping is used for the fixation of Small Fragment Safety Lock Plate.
• The larger core dia of the screw provides strength and a threaded head for locking in the plate.
• Self-tapping eliminates the use of the bone tap.
• Drill Bit: 2.8mm

• Drill Bit: 2.8mm

• Cortex Screw Ø 3.5mm are used for the fixation of small fragment implants.
• A larger Core of the screw provides strength and a spherical surface under the head of the screw is for better compression.
• The self-tapping feature eliminates the use of the bone tap.
• Use 2.5mm Drill Bit.

• Cancellous Bone Screw Ø 4.0mm, Short-thread.
• These screws are used to fix small fragment implants.
• The cancellous screws are indicated for use in cancellous regions of the bone.
• The deep and widely spaced cuts increase pull-out resistance in soft cancellous bones.
• Drill Bit: 2.5mm

• Profile:
• Not to be used as lag screw.
• Drill Bit: 2.5mm