Locking Proximal Humerus Plate is used for complex and unstable fractures.

• Multifragmentary (dislocated) fractures requiring open reduction
• Unstable subcapital fractures
• Subcapital pseudarthrosis
• Osteotomies

Suture holes The fixation of additional wire loops or sutures attached to the tubercles (in 3- or 4-fragment fractures) neutralises the muscle tension and helps to maintain reduction.

The head of a plate allows only 3.5 mm Safety Lock Screws and the shaft of the plate allows both 3.5 mm Safety Lock and Cortical screws.

• The Filos - Proximal Humerus safety Plate 3.5 - Standard is designed to match the anatomy of the proximal humerus. The plate is separately used for the right and left humerus.
• The Filos - Proximal Humerus safety Plate 3.5 - Standard, Head Region of the plate accommodates Safety Lock Screw Ø 3.5 mm- Self Tapping and Shaft region accommodates both Cortex Screw Ø 3.5 mm-Self Tapping and Safety Lock Screw Ø 3.5 mm-Self Tapping
• The Filos - Proximal Humerus safety Plate 3.5 - Standard is indicated for fractures, fracture-dislocations, osteotomies, and non-unions of the proximal humerus, particularly in osteopenic bone.

• Angular stability, Anatomic design, Dedicated screw.
• 9 proximal screw holes for Safety Locking Screws Ø 3.5 mm enable an angular stable construct to enhance the grip in multi fragment fractures.
• Anatomic reduction: Fracture reduction and fixation to restore anatomical relationships.
• Stable fixation: Stability by fixation or splintage, as the personality of the fracture and the injury, requires. The products optimize purchase for maximum compression and stability.
• Preservation of blood supply: Preservation of the blood supply to soft tissue and bone by careful handling, atraumatic surgery. A limited-contact plate design reduces plate-to-bone contact and helps to preserve the periosteal blood supply.

• Dislocated two-, three-, and four-fragment fractures of the proximal humerus.
• Pseudarthroses in the proximal humerus
• The long plate is required for fractures extending to the proximal diaphysis.

• Safety Lock Screw Ø 3.5mm- Self Tapping is used for the fixation of Small Fragment Safety Lock Plate.
• The larger core dia of the screw provides strength and a threaded head for locking in the plate.
• Self-tapping eliminates the use of the bone tap.
• Drill Bit: 2.8mm

• Drill Bit: 2.8mm

• Cortex Screw Ø 3.5mm is used for the fixation of small fragment implants.
• A larger Core of the screw provides strength and a spherical surface under the head of the screw is for better compression.
• The self-tapping feature eliminates the use of the bone tap.
• Use 2.5mm Drill Bit.

• Cancellous Bone Screw Ø 4.0mm, Short-thread.
• These screws are used to fix small fragment implants.
• The cancellous screws are indicated for use in cancellous regions of the bone.
• The deep and widely spaced cuts increase pull-out resistance in soft cancellous bones.
• Drill Bit: 2.5mm

• Profile:
• Not to be used as lag screw.
• Drill Bit: 2.5mm